AllClear
Touchless Pat-down
AllClear™ is a handheld, image-free, battery-powered, passive millimeter wave people screening device that detects both metallic and non-metallic objects. AllClear is also an alternative to physical pat-downs by providing a high-level of object detection without making any contact with the person's body. All surfaces of a person can be scanned without contact—including the hair, top of head, chest, arms, sides, groin area, legs, and ankles.
As it captures no images, AllClear alerts the operator to a potential detection through lights (LEDs), as well as sound or vibration, depending on the mode selected. It only requires one operator, minimal training, and is easy to use. With AllClear, security personnel can easily detect concealed items while protecting the safety and privacy of the people being screened.
How it Works

Photos
AllClear Diagrams


Features & Benefits
Applications
Sensitivity
|
Ease of Use
Cost Effective
|
Safe for all! – No privacy concerns!
Specifications
-
Power Supply: 100–240 VAC external charger supplies 12V DC, 20W max
Charger has the following interchangeable plugs:
United States, European, United Kingdom, and Australia/New Zealand - Detector Millimeter Wave Frequency: 100 to 200 GHz (90 GHz center frequency, 20 GHz bandwidth)
- Operating Temperature: 0°C to 46°C (32°F to 115°F)
- Storage Temperature: -7ºC to +49ºC (19°F to 120°F)
- Operating Environment: For Indoor use only
- Dimensions: 467 x 90 x 72 mm (18.38 x 3.54 x 2.83 in)
- Weight: 680 g (23.6 oz.)
- Numbers of Sensors: 7 radiometric Millimeter Wave (MMW) sensors
- Battery: Lithium ion 3.7 volt internal battery pack, 5800 mAh
- Battery Life: Up to 16 hours
CONTROLS
- Power Button: Powers AllClear on and off. Illuminates green/yellow/red to indicate charging and battery status.
- Mode Button: Cycles through alert modes and volume levels for audible alert.
- Zero: Zeros the AllClear. Flashes yellow to indicate when unit is ready to be zeroed (to equalize the sensors).
- Alert Indicator LEDs (2): Illuminate red when the MMW sensors detect an object.
- Sensor Indicator LEDs (7): Synched with the 7 MMW sensors to indicate the locality of the detected object. Each LED illuminates blue when the related sensor detects an object.
MobileScan
Mitigating Risk, Minimizing Loss
MobileScan® is a portable GEN 2® device that is designed for ease of transport. This system is completely self-contained, uses its own rechargeable power supply, and can be at operational readiness within minutes. The MobileScan is ideal for installations where transportable turnkey checkpoints are needed.
How it Works

Photos
![]() |
![]() |
![]() |
![]() |
Features & Benefits
Applications
Sensitivity
Ease of Use
|
Versatile Technology
Cost Effective
|
Emits no radiation! - Reveals no anatomical details!
Specifications
-
Power Supply: Universal input can accept 90-265 volts
-
Power Consumption: Up to 150 watts during charging
-
Detector Millimeter Wave Frequency: 80 to 100 GHz (90 GHz center frequency, 20 GHz bandwidth)
-
Hardware Operating Temperature: 0°C to 50°C (32°F to 122°F)
-
Software Operating Temperature: Ambient air temperature not to regularly exceed 26°C (80°F)
-
Hardware Operating Humidity: 0 to 95% RH (non-condensing)
-
Hours Operation: Up to 8 hours (may vary) on battery
-
Dimensions: (H x W x D): 134 cm x 41 cm x 78.0 cm (53 in x 16 in x 31 in)
-
Weight: Net: approximately 100kg (220 lbs) excluding laptop and backdrop
-
Shipping Dimensions: (H x W x D): 159 cm x 64 cm x 97 cm (63 in x 25 in x 38 in)
-
Shipping Weight: Net approximately 202 kg (445 lbs) including laptop and backdrop
Interfaces
-
Monitor output: D-sub 15 (VGA) connector (1024 x 768 72 Hz default)
-
Network: 10/100 Ethernet, RJ45
-
Peripheral Interface: Two USB 2.0
-
Auxiliary AC power for laptop: 120 VAC
-
Laptop: Intel Core 2 Duo Notebook, 2.5 GHz, 2GB RAM
ScanPort
Mitigating Risk, Minimizing Loss
ScanPort® is a custom engineered and self-contained pod system. Designed for rugged terrains, ScanPort integrates whole-body scanning with biometric and other tools for a comprehensive imaging system. This system enables military personnel to conduct screenings in remote location while remaining out of harm’s way during dangerous situations. Suspects can also be held within a secure area inside the ScanPort system.
Photos
![]() |
![]() |
![]() |
Features & Benefits
Applications
Sensitivity
Cost Effective & Safe
|
Functionality
|
Emits no radiation! - Reveals no anatomical details!
Specifications
EXTERIOR
INTERIOR
|
HVAC
COMMUNICATION AND OPERATION
POWER SUPPLY
|
GEN 2
Mitigating Risk, Minimizing Loss
GEN 2® is the base technology for all Brijot® systems. This system enables security screeners to perform manual checks quickly and efficiently without physical contact. The GEN 2 alerts screeners to potential metallic and non-metallic concealed objects under clothing. It also has a small footprint and easily integrates with existing security measures.
*The image below shows accessories not included in the standard specifications.
How it Works

Photos
![]() |
![]() |
![]() |
![]() |
Features & Benefits
Applications
Sensitivity
Ease of Use
|
Versatile Technology
Cost Effective
|
Emits no radiation! - Reveals no anatomical details!
Specifications
- Power Supply: Universal input can accept 100-240 VAC. External AC/DC adapter supplied.
- Power Consumption: 75-100 watts typical (may vary according to ambient temperature)
- Detector Millimeter Wave Frequency: 80 to 100 GHz (90 GHz center frequency, 20 GHz bandwidth)
- Hardware Operating Temperature: 0°C to 50°C (32°F to 122°F)
- Software Operating Temperature: Ambient air temperature not to regularly exceed 26°C (80°F).
- Operating Humidity: 0 to 95% RH (non-condensing)
- Dimensions: (H x W x D): 83.8 cm x 34.5 cm x 34.9 cm (33.0 in x 13.5 in x 13.7 in)
- Weight: approximately 39 kg (86 lbs)
- Shipping Dimensions: (H x W x D): 64.8 cm x 61.93 cm x 106.5 cm (22.5 in x 42 in x 24.38 in)
- Shipping Weight: Net: approximately 57 kg (125 lbs)
Interfaces
- Monitor output: D-sub 15 (VGA) connector (1024 x 768 72 Hz default)
- Network: 10/100 Ethernet, RJ45
- Peripheral Interface: Two USB 2.0, PS/2: Mouse/Keyboard









.png)




